Call Us : (+98 21) 88 20 20 60

..:: Parsethylene kish co. does not have any representative in iran ,The Company`s products are sold only through the central office with an official Certificate ::..

MDPE pipe

MDPE pipe

What is MDPE pipe?

MDPE pipe is used for cold water mains into new builds and to replace old lead water supplies into both domestic and commercial properties.

Medium Density Polyethylene as it is fully known, (or blue poly as it is regularly called in merchants) is a durable, seamless pipe suitable for delivering high pressure mains water from the main run, into properties and can be used for replacing existing lead water main pipes.

Polyethylene blue PE80 pipe has been tested to 12bar and is available in outside diameters of 20mm, 25mm, & 32mm with 50mm & 63mm sizes available to special order. This plain ended coil is suitable for use below ground on cold water services.

  • Excellent pressure resistance, tested to 16 BAR.
  • No need to dismantle the connector in order to fit the pipe.
  • No need to chamfer the pipe, pieces will not be lost on the job site.
  • Cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done.
  • Pressure Ratings for Medium Density (PE80) Polyethylene Pipe:
Normal
O/D mm
SDR
Rating
RAR
Rating
20 9 16
25 11 12.5
32 11 12.5
40 11 12.5
50 11 12.5
63 11 12.5

MDPE pipe

MDPE Fittings

Fittings for MDPE are compression fittings, and contain a number of parts to clamp and seal the pipe into the fitting, making it secure and leak free. MDPE pipe and Fittings include MDPE straight coupler's, elbows, Tee's, Reducers, Male adapters, female adapters and blanking caps. Fittings are also available to convert the MDPE Pipe and Fittings over to copper tube with a 15mm.

High quality compression fittings for MDPE pipe with excellent pressure resistance and tested to 16bar. Suitable for use above and below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress.

  • The fittings have a co-polymer polypropylene Body, Body Nut and Guide Ring, Acetal Grab Ring and Nitrile Seal.
  • High Impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
  • S16 fittings are designed and suitable to be used at a 16 bar pressure rating.
  • Operating temperature -10°C +45°C

Nominal Pressure (PN):

Temp °C -10/+25°C +26/+35°C +36/+45°C
PN 16 12.5 10
PN 12.5 10 8
PN 10 8 6

MDPE pipe

MDPE pipe

MDPE pipe

Related Topics
Case Studies

Top categories

 Contact us
  Pars Ethylene Kish at a glance
  Pars Ethylene Kish, a symbol of capability and quality
  Mission and Vision
  Sale and its Strategies in Pars Ethylene Kish
  Reason for High Quality of Pars Ethylene Kish Products
  Quality Control Laboratory
  Guaranty & after sales service
  Reasons of paying attention to quality
  INSO Certificate
  Maintenance and storage of HDPE pipes
  Instructions for storing HDPE pipe against UV
  Polyethylene Joining Procedures
  Polyethylene Pipe
  HDPE pipes for gas supply
  HDPE Corrugated Pipes
  HDPE Single Wall Fittings
  HDPE Double Wall Fittings
  HDPE Electrofusion Fittings
  Cage fish farming
  Domestic Sewage Treatment
  Polyethylene Manholes
  Telecommunication manhole
  HDPE Fire Fighting Pipe
  HandBook of HDPE Pipe
  HDPE Pipe price list
  Price list of double-Layer Corrugated pipe
  FM Approval
  PDMS Catalogue
  HDPE Pipes in Power Plants
  HDPE Pipes in railway and urban rail
  HDPE Pipe in Mining
  HDPE Pipe in Airport
  HDPE Pipe in Conducting Agricultural Pesticides
  HDPE Pipe in drain
  HDPE Pipe in Landfills
  The Coating Materials Of Steel Pipes
  Cable Covering
  HDPE pipe in Ventilation
  HDPE Pipe in Ships
  HDPE Pipes in Floor Heating
  Gallery
  Polyethylene Manhole Sewage
  U-PVC Pipe
  Draining Pipe
  PEX Pipe
  Polyethylene drip irrigation tape
  PushFit System
  HDPE Dredging Pipe
  Polyethylene Welding
  Sewer Fittings
  Application of Polyethylene Manhole
  Polyethylene Tank
  PE Septic Tank
  PE Jersy Barrier
  Fire Sprinklers
  Composite Manhole Cover
  PE Valve Box
  HDPE Pipe in Sea Water
  Price of HDPE pipe
  Brochures & Catalogue
  Polyethylene Machinary
  Certificates
  Raw Material
  Borouge HDPE Pipe Systems
  Reference standards
  Standards for HDPE Pipe
  Technical Data
  Job Opportunities
  HSE Plan
  Welding Course Study
Quality Begins with Pars Ethylene Kish The new generation of parsethylene kish corrugated pipes PDMS Catalog Pars Ethylene Kish Polyethylene cage fish farming Domestic Sewage Treatment FM Approval Certificate Pars Ethylene Kish Isiri Certeficate of Parsethylene Kish 17025 Certificates Integrated Management System SGS Quality Managment System Raw Material of HDPE of Parsethylene Kish Reference standards of Polyethylene, PVC and polymer Handbook of Pars Ethylene Kish products Technical Certificate of Road, Housing and Urban Development Research Center Health Premission of Polyethylene pipefor water supply New Generation of Composite Cover Failure modes and mechanisms in cast iron pipe Case Studies Reference standards of PE, PVC and polymer Fun & Game Join us on FaceBook Follow Us on Telegram

Pars Ethylene kish does not have any representative in iran ,The Company`s products are sold only through the central office 

::
Copyright © 2007- 2018 Pars Ethylene Kish Co. :: All rights reserved :: Design & Development by: Pars Ethylene Kish ::