..:: Parsethylene kish co. does not have any representative in iran ,The Company`s products are sold only through the central office with an official Certificate ::..

Polyethylene drainage manhole (sewage)

Polyethylene Drainage Manhole

Sewage Manhole

Drainage manholes ( chamber in drainage )are used on sloping surfaces and have inlet and outlet pipes, which are used in such a way that the converter pipes have a higher height and reduce the slope of the surfaces.

Polyethylene drainage manhole (chamber in drainage)

When the flow of a sewage is connected to other sewage, if the surface difference between these sewage is high and the water level in the main sewage at its highest position is greater than 0.6 meters, then the manner of the drainage manhole structure is like the drainage pipe and completely vertical or almost vertical, and sewage is classified from top to bottom. A drainage manhole is also used on sloping surface sewage lines, when drainage is more than 0.6 m, we need to control the slope to reach the required speed.

inspection chamber in drainage system and Internal structure of polyethylene drainage manhole

The internal structure of the drainage manhole ( chamber in drainage ), in which the pipes are mechanically connected to the walls, are different from the manhole that the input pipes are tied by manpower, which is the difference of about 26 inches (600 mm) or more. There is also a different type of engineering design in this type of manhole, including the reduction of SH emission, unpleasant odor, sewage confusion in the manhole channel, and the prevention of wear and corrosion of the internal structure of the manhole.
The settings must be such that each piece of the product can rotate and the door can be separated from the pipes.

  • 1.    The fittings should be fitted with inlet pipes and have a diameter of about 10 inches (250 mm). The end of the fitting must accept the final gaskets of SDR26PVC SDR / 635 or 8 and the gravity sewage pipe should be horizontally placed inside it to allow flow into the manhole.
  • 2.    The interior structure of the door may be removed to create an empty area and may be attached to the body with an iron stainless steel chains to prevent losing the door.

Polyethylene drainage manhole (sewage)

Polythene drainage manhole material

  • Low-density polyethylene (LDPE) body
  • Door of high density polyethylene (HDPE)

Drainage manhole fittings

Drainage manhole fittings should be based on the standards / 1.3.1 S and / a3.1 S with a diameter of 2.47 meters for sewage pipes; / B3.1 S and / C3.1S can also be used for sewage of 20 cm diameter. If other sizes are used, special designs should be applied. Larger sewer pipelines do not usually have a pre-predicted design because it may require more space.
Drainage manholes have splittings, and these divisions are based on tube design. In order to use the fittings for pipes, it is first necessary to check the pipes and select the drainage manhole fittings of the same type with the pipes.

Polyethylene drainage manhole (sewage)

inspection chamber in drainage system
Energy dissipation in circular drainage manhole in different outlet flow

Drainage manhole ( chamber in drainage ) is an important tool in reducing the speed and eliminating the energy of urban sewage networks. The loss of energy in the drainage manhole depends on the manhole flow pattern in the outlet pipes and downstream forces, and is similar to the manhole's hydraulic and geometric parameters. The loss of manhole energy dissipated with sample diameters is investigated. Finally, energy dissipation is considered when cooling the system.
Drainage manhole ( chamber in drainage ) has a hydraulic feature that is widely used in urban sewage networks in sloping ponds. The loss of energy in the drainage manhole is one of the major concerns of in-city systems designers. There should be a certain amount of energy loss in the falling manholes to prevent excessive water velocity in the outlet pipes. However, this is not always feasible, as widespread waste disposal takes place in a sewage system during floods.
The energy loss in the drainage manhole ( chamber in drainage ) is related to several factors, which can be classified into three categories:

  • 1.    The flow conditions are generally related to the ratio of the upper tube filling and the flow approach.
  • 2.    The flow conditions, for example, the free flow rate, which includes free-flow and pressure-flow, limits the flow, which reverses the effects of groundwater on the outlet pipe. Manhole configuration and dimensions, which include input and output settings.
Polyethylene drainage manhole

Polyethylene drainage manhole

Polyethylene drainage manhole

Polyethylene drainage manhole



Top categories

UAE 1: 00971 56 286 1414
H.Emami @ Parsethylene-kish.com
UAE 2: 00971 56 286 1515
Info @ Parsethylene-kish.com
IR : +9821 88 20 20 60
  Contact us
  Pars Ethylene Kish at a glance
  Pars Ethylene Kish, a symbol of capability and quality
  Mission and Vision
  Sale and its Strategies in Pars Ethylene Kish
  Reason for High Quality of Pars Ethylene Kish Products
  Quality Control Laboratory
  Guaranty & after sales service
  Reasons of paying attention to quality
  INSO Certificate
  Maintenance and storage of HDPE pipes
  Instructions for storing HDPE pipe against UV
  Polyethylene Joining Procedures
  Polyethylene Pipe
  HDPE pipes for gas supply
  HDPE Corrugated Pipes
  HDPE Single Wall Fittings
  HDPE Double Wall Fittings
  HDPE Electrofusion Fittings
  Cage fish farming
  Domestic Sewage Treatment
  Polyethylene Manholes
  Telecommunication manhole
  HDPE Fire Fighting Pipe
  HandBook of HDPE Pipe
  HDPE Pipe price list
  Price list of double-Layer Corrugated pipe
  FM Approval
  PDMS Catalogue
  HDPE Pipes in Power Plants
  HDPE Pipes in railway and urban rail
  HDPE Pipe in Mining
  HDPE Pipe in Airport
  HDPE Pipe in Conducting Agricultural Pesticides
  HDPE Pipe in drain
  HDPE Pipe in Landfills
  The Coating Materials Of Steel Pipes
  Cable Covering
  HDPE pipe in Ventilation
  HDPE Pipe in Ships
  HDPE Pipes in Floor Heating
  Gallery
  Polyethylene Manhole Sewage
  U-PVC Pipe
  Draining Pipe
  PEX Pipe
  Polyethylene drip irrigation tape
  PushFit System
  HDPE Dredging Pipe
  Polyethylene Welding
  Sewer Fittings
  Application of Polyethylene Manhole
  Polyethylene Tank
  PE Septic Tank
  PE Jersy Barrier
  Fire Sprinklers
  Composite Manhole Cover
  PE Valve Box
  HDPE Pipe in Sea Water
  Price of HDPE pipe
  Brochures & Catalogue
  Polyethylene Machinary
  Certificates
  Raw Material
  Borouge HDPE Pipe Systems
  Reference standards
  Standards for HDPE Pipe
  Technical Data
  Job Opportunities
  HSE Plan
  Welding Course Study
Quality Begins with Pars Ethylene Kish The new generation of parsethylene kish corrugated pipes PDMS Catalog Pars Ethylene Kish Polyethylene cage fish farming Domestic Sewage Treatment FM Approval Certificate Pars Ethylene Kish Isiri Certeficate of Parsethylene Kish 17025 Certificates Integrated Management System SGS Quality Managment System Raw Material of HDPE of Parsethylene Kish Reference standards of Polyethylene, PVC and polymer Handbook of Pars Ethylene Kish products Technical Certificate of Road, Housing and Urban Development Research Center Health Premission of Polyethylene pipefor water supply New Generation of Composite Cover Failure modes and mechanisms in cast iron pipe Case Studies Reference standards of PE, PVC and polymer Fun & Game Join us on FaceBook Follow Us on Telegram

Pars Ethylene kish does not have any representative in iran ,The Company`s products are sold only through the central office 

::
Copyright © 2007- 2018 Pars Ethylene Kish Co. :: All rights reserved :: Design & Development by: Pars Ethylene Kish ::