..:: Parsethylene kish co. does not have any representative in iran ,The Company`s products are sold only through the central office with an official Certificate ::..

 polyethylene manholes

Polyethylene manhole parts

Pars Ethylene Kish Polyethylene Manholes have a unique advantage, and this is the modular advantage of polyethylene manholes produced by this company. This definition means that the manholes of Pars Ethylene Kish are not a fragment and consist of different parts with different uses, which allows designers and implementers to freely and unrestrictedly choose their manhole height and diameter. In prefabricated manholes for the first time, it is possible to see the possibility of producing polyethylene manholes, and the modularity of the Pars Ethylene Kish manholes with the design and construction of modern rotary molding machines and precision molds that were carried out by Pars Ethylene Kish specialists and has finally been approved and certified by the Iranian Bureau of Standardization.

Polyethylene Manhole Parts


Pars Ethylene Kish Co. has been able to completely implement and treat with polyethylene manholes, including couplers, gaskets and changeable couplers, by providing methods and solutions that fully comply with world standards, as well as designing and manufacturing side accessories for polyethylene manholes and ecoomic production, introduces it to construction projects and related persons. The main components of Polyethylene are the following, which will be followed by the explanation and introduction of each component.

  • •    Manhole insect piece – BASE
  • •    Intermediate manhole interface – Raiser
  • •    Top Cone Manhole – Taper
  • •    Coupler
  • •    Washer

Polyethylene manhole components

Lower part or manhole insect piece

Manhole insect piece is the most important part of the polyethylene manholes, because firstly, the most stresses, such as radial loads and pressurizing forces, as well as manholes in areas where sub-surface waters are high, are loaded with floating loads. Secondly, since almost all connections to this part of the manhole are connected, the sealing point also plays a significant role in the performance of the manholes, it should be noted that these connections to prevent the introduction of subsurface water into the sewage network, which is the efficiency of the network sealing of the connections in the area of the manhole insert is very important, as well as for the lack of penetration of sewage currents into the surrounding soil, which lowers the quality of the underground table.

Types of polyethylene manhole insect piece

1000 mm diagonal polyethylene manhole insect in the form of a BOX TYPE for inlet and outlet pipe sizes of up to 400 mm, suitable for situations with a height difference.
Polyethylene Manhole Parts

Medium wall thickness: 10mm - Weight: 32kg
1000 mm diameter polyethylene manhole insect has a quadricecular muscle (INVERT) with a direct inlet, two 90-degree inputs, and an output of up to 400 mm tube size.
Medium wall thickness: 10 mm - Weight: 36 kg
1000 mm diagonal polyethylene manhole insulated inverted (INVERT) with a direct inlet and two inlets 45 degree and an output up to a pipe size of 400 mm
Medium wall thickness: 10mm - Weight: 35kg
Polyethylene manhole insect with a diameter of 1000 mm in muscular twist (INVERT) with one inlet and one direct outlet and up to 400mm pipe sizes
Medium wall thickness: 10mm - Weight: 42kg
Polyethylene manhole insect with a diameter of 1200 mm in muscular twist (INVERT) with one inlet and one direct output up to a pipe size of 500 mm.
Medium wall thickness: 10mm - Weight: 52kg
Polyethylene manhole insectof 1200 mm in the form of a cross-section with a direct inlet of two 90-degree inputs and an output up to a pipe size of 400 mm.
Medium wall thickness: 10mm - Weight: 35kg
Polyethylene manhole insect of 1200 mm in diameter in the form of a cross-section with a direct input of two 90-degree inputs and an output up to a pipe size of 400 mm
Suitable for 1200 manholes with 1,000 rises or low depth manholes.
Medium wall thickness: 10mm - Weight: 44kg
Polyethylene manhole insect of 1200 mm in the form of a four-way muscular with a direct input of two inputs of 45 ° and an output up to a pipe size of 400 mm
Suitable for 1200 manholes with 1,000 rises or low depth manholes.
Medium wall thickness: 10mm - Weight: 43kg
Polyethylene manhole insect with a diameter of 1200 mm in the form of a quadracycle with a diameter of 100 to 1000 mm for the size of the inlet and outlet pipe size up to 500 mm
Suitable for situations where the difference in the height of the inlet and outlet is up to 40 centimeters, as well as for low-manholes and manholes of valves.
Medium wall thickness: 10mm - Weight: 58kg

Intermediate piece of polyethylene manhole interface

Mid-section or raiser parts are made in pieces of 1000 or 1200 mm in diameter, which are produced at different heights and used to create different depths of polyethylene manules.
These parts have rims on the bottom and upright, which can easily be mounted on the insect or on each other. The middle parts of the Pars Ethylene Kish manholes are reinforced with annular pivots so that they can easily withstand lateral and vertical loads (shear stresses) and sealed by special sealing washers than other manhole parts.

Polyethylene Manhole Parts

Polyethylene manholes intermediate raiser parts

Polyethylene Manhole Parts

A 1000 mm diameter midsole (raiser) to increase the depth of the polyethylene manhole by 25 centimeters.
Medium wall thickness: 10 mm
Weight: 15 kg
A 1000 mm diameter midsole (raiser) to increase the depth of the polyethylene manhole by 50 centimeters.
Medium wall thickness: 10 mm
Weight: 24 kg
Mid-section (Riser) with a diameter of 1000 mm to increase the depth of the polyethylene manhole by 75 centimeters.
Medium wall thickness: 10 mm
weight: 38 kg
A 1000 mm raiser piece to increase the depth of the polyethylene manhole by 100 centimeters.
Medium wall thickness: 10 mm
weight: 48 kg
Intermediate piece (raiser) with a diameter of 1200 mm to increase the depth of the polyethylene manhole by 100 centimeters.
Medium wall thickness: 10 mm
Weight: 52 kg
Intermediate piece (raiser) with a diameter of 1200 mm to increase the depth of 50 cm polyethylene manhole
Medium wall thickness: 10 mm
Weight: 24 kg

Types of Manhole conversion raiser

Conversion raiser or intermediate part is used to increase the depth of the 1200 mm diameter polyethylene manhole by 50 cm, while simultaneously reducing the diameter of the manhole from 1200 to 1000 mm.
Medium wall thickness: 10 mm
Weight: 26 kg
Conversion raiser or intermediate part to increase the depth of the 1200 mm diameter polyethylene manhole by 100 cm and simultaneously reducing the diameter of the manhole from 1200 to 1000 mm.
Medium wall thickness: 10 mm
Weight: 55kg

Polyethylene Manhole Parts

Upper conical part of manhole

Manhole cone types

conical or tipper for polyethylene manholes of 1000 or 1200 mm in diameter, which has an inlet opening of from 60 cm to 1 meter.
The average wall thickness : 10 mm.
Weight: 24 kg

Polyethylene Manhole Parts

conical or tipper for 1000 or 1200 mm polyethylene manholes that increase the inlet opening from 60 cm to 1 meter.
Medium wall thickness: 10 mm
Weight: 33 kg
conical or tipper for polyethylene manholes with a diameter of 1000 or 1200 mm, which increases the inlet opening from 60 cm to 1 meter. This type of tipper is used for lower manholes or valve manholes.
Medium wall thickness: 10 mm
Weight: 19 kg
 



Polyethylene Manhole


Top categories

UAE 1: 00971 56 286 1414
H.Emami @ Parsethylene-kish.com
UAE 2: 00971 56 286 1515
Info @ Parsethylene-kish.com
IR : +9821 88 20 20 60
  Contact us
  Pars Ethylene Kish at a glance
  Pars Ethylene Kish, a symbol of capability and quality
  Mission and Vision
  Sale and its Strategies in Pars Ethylene Kish
  Reason for High Quality of Pars Ethylene Kish Products
  Quality Control Laboratory
  Guaranty & after sales service
  Reasons of paying attention to quality
  INSO Certificate
  Maintenance and storage of HDPE pipes
  Instructions for storing HDPE pipe against UV
  Polyethylene Joining Procedures
  Polyethylene Pipe
  HDPE pipes for gas supply
  HDPE Corrugated Pipes
  HDPE Single Wall Fittings
  HDPE Double Wall Fittings
  HDPE Electrofusion Fittings
  Cage fish farming
  Domestic Sewage Treatment
  Polyethylene Manholes
  Telecommunication manhole
  HDPE Fire Fighting Pipe
  HandBook of HDPE Pipe
  HDPE Pipe price list
  Price list of double-Layer Corrugated pipe
  FM Approval
  PDMS Catalogue
  HDPE Pipes in Power Plants
  HDPE Pipes in railway and urban rail
  HDPE Pipe in Mining
  HDPE Pipe in Airport
  HDPE Pipe in Conducting Agricultural Pesticides
  HDPE Pipe in drain
  HDPE Pipe in Landfills
  The Coating Materials Of Steel Pipes
  Cable Covering
  HDPE pipe in Ventilation
  HDPE Pipe in Ships
  HDPE Pipes in Floor Heating
  Gallery
  Polyethylene Manhole Sewage
  U-PVC Pipe
  Draining Pipe
  PEX Pipe
  Polyethylene drip irrigation tape
  PushFit System
  HDPE Dredging Pipe
  Polyethylene Welding
  Sewer Fittings
  Application of Polyethylene Manhole
  Polyethylene Tank
  PE Septic Tank
  PE Jersy Barrier
  Fire Sprinklers
  Composite Manhole Cover
  PE Valve Box
  HDPE Pipe in Sea Water
  Price of HDPE pipe
  Brochures & Catalogue
  Polyethylene Machinary
  Certificates
  Raw Material
  Borouge HDPE Pipe Systems
  Reference standards
  Standards for HDPE Pipe
  Technical Data
  Job Opportunities
  HSE Plan
  Welding Course Study
Quality Begins with Pars Ethylene Kish The new generation of parsethylene kish corrugated pipes PDMS Catalog Pars Ethylene Kish Polyethylene cage fish farming Domestic Sewage Treatment FM Approval Certificate Pars Ethylene Kish Isiri Certeficate of Parsethylene Kish 17025 Certificates Integrated Management System SGS Quality Managment System Raw Material of HDPE of Parsethylene Kish Reference standards of Polyethylene, PVC and polymer Handbook of Pars Ethylene Kish products Technical Certificate of Road, Housing and Urban Development Research Center Health Premission of Polyethylene pipefor water supply New Generation of Composite Cover Failure modes and mechanisms in cast iron pipe Case Studies Reference standards of PE, PVC and polymer Fun & Game Join us on FaceBook Follow Us on Telegram

Pars Ethylene kish does not have any representative in iran ,The Company`s products are sold only through the central office 

::
Copyright © 2007- 2018 Pars Ethylene Kish Co. :: All rights reserved :: Design & Development by: Pars Ethylene Kish ::