..:: Parsethylene kish co. does not have any representative in iran ,The Company`s products are sold only through the central office with an official Certificate ::..

HDPE Fitting

Polyethylene fittings

HDPE Fittings

Polyethylene pipelines require various PE fittings (HDPE Fitting) according to type of application. Polyethylene Fitting PE pipes are used in sewage , water supply , fire systems , cable & gas covering, which each pipe fitting is suitably designed as per application demands. Electro fusion fittings are applied for gas supplies , but screw fittings are used in water supplies up to 10 atm pressure & for other projects polyethylene welded fittings are applied according to German DIN16963 . It should be noted that the domestic sewage systems do not follow the regulations above. See articles connection methods, for more information.

PE fittings characteristics:

Polyethylene Fitting
  • High resistance to fracture and cracks caused by external pressures

  • Impact resistant

  • Corrosion and abrasion resistant

  • Rust resistant

  • High resistance to vibrations caused by earthquake

  • Chemical resistant

  • Significantly low scum sedimentation due to smoothness of inner and outer walls

  • Very low pressure drop due to low friction of internal wall surface

  • High flexibility, low cost installation & no special tools required for installing or running the pipelines

Joining PE pipes

Sewage Pipe Fittings

HDPE pipes are usually manufactured with two simple ends. Thus, in order to establish a connection between the two lengths, it is necessary to connect one simple end of a length to the simple end of the other with a fitting. The various methods used to connect HDPE pipes ( HDPE Pipe Fittings ), accessories and taps, are as follows:

90` Fitting

1. Thermal butt (butt fusion)

2. Thermal bushing

3. Electrofusion

4. Flange

5. Extrusion

6. Bolting

7. Rubber gasket latching

The connection of polyethylene pipes should not be carried out inside the trench. The fairly large length of multiple lengths of pipes fused outside the trench will provide sufficient flexibility, with which it can be partly inserted into the trench, and keep the end of it to connect to the other lengths outside the trench. In order to perform the correct fusion, it is essential to observe the following principles and criteria:

T Fitting

• Pipes of different thicknesses should not be fused together.

• The flatted edges of the pipe ends should not be in contact with the hand after being chipped.

• Clean the cuts and particles from inside the pipe and onto the device.

• The device should not be wet, dirty and dusty.

• Do not expel pipes from the device before fully cooling.

• Use qualified people.

• As for any specific type of HDPE material, there is a certain range for the main parameters of fusion, including temperature, edge pressure and cooling time, before any PE fusion, the manufacturer should be consulted and the relevant personnel should be trained for implementation by the manufacturer or the manufacturer of the fusion device.

• If a connection between two types of HDPE pipes, pipes or related fittings is required, the fusion method must be sought from both manufacturers.( for more information resd HDPE Pipe Fittings )

• In the case of rainy weather, extreme winds and cold, avoid fusion. In case of necessity, the tent should be used, and in any case, the working environment temperature should not be below 0 C in any case.

In addition, the contractor must provide proper tools for performing the fusion. As a guide, at least the required equipment and machinery are as follows:

Polyethylene Pipe & Fitting

• A generator to provide the thermal energy for the iron plate, shredder and hydraulic pumps to provide the desired pressure

• The fusion machine should be equipped with appropriate clamps and timers.

• Clamps for fixing the two sides of the iro.

• Napkin to clean the iron plate

• Tools for cutting the extruded edges of the pipe from inside and outside

• Measurer the extruded part of the pipe

• Thermometer for measuring the surface temperature of the iron

• Cutting tool

• Thermometer for measuring air temperature

• Timer

HDPE Fitting

Electrofusion is the most reliable method for joining PE pipes. In this connection, all accessories and fittings in PE pipe couplings, sockets or accessories are equipped with an electric heating coil. By heating coils, adjacent materials begin melting and by increasing the melting range and reaching the pipe wall, the outer surface of the pipe melts. Due the interaction between molecules, the pipe will join the socket.
Due to the limited production of PE pipes in terms of work pressure, diameter, accessories, connection type and production capacity, it is necessary to identify these constraints and adapt to the requirements of the design before making the pipe selection certainty.

For more information and download the catalogues visite HDPE Fittings Catalogue page

Polyethylene Fitting Catalouge ( All type in Separate files - in 1 zip file )

• HDPE Fitting Cataloge ( All type in  Single File - PDF )

• HDPE Screw Fitting Cataloge ( All type in Single File - PDF )

HDPE Fitting Gallery

Parsethylene Kish HDPE Fittings

HDPE Fitting

HDPE Fitting

HDPE Fitting

HDPE Fitting

 

HDPE Fitting


Top categories

UAE 1: 00971 56 286 1414
H.Emami @ Parsethylene-kish.com
UAE 2: 00971 56 286 1515
Info @ Parsethylene-kish.com
IR : +9821 88 20 20 60
  Contact us
  Pars Ethylene Kish at a glance
  Pars Ethylene Kish, a symbol of capability and quality
  Mission and Vision
  Sale and its Strategies in Pars Ethylene Kish
  Reason for High Quality of Pars Ethylene Kish Products
  Quality Control Laboratory
  Guaranty & after sales service
  Reasons of paying attention to quality
  INSO Certificate
  Maintenance and storage of HDPE pipes
  Instructions for storing HDPE pipe against UV
  Polyethylene Joining Procedures
  Polyethylene Pipe
  HDPE pipes for gas supply
  HDPE Corrugated Pipes
  HDPE Single Wall Fittings
  HDPE Double Wall Fittings
  HDPE Electrofusion Fittings
  Cage fish farming
  Domestic Sewage Treatment
  Polyethylene Manholes
  Telecommunication manhole
  HDPE Fire Fighting Pipe
  HandBook of HDPE Pipe
  HDPE Pipe price list
  Price list of double-Layer Corrugated pipe
  FM Approval
  PDMS Catalogue
  HDPE Pipes in Power Plants
  HDPE Pipes in railway and urban rail
  HDPE Pipe in Mining
  HDPE Pipe in Airport
  HDPE Pipe in Conducting Agricultural Pesticides
  HDPE Pipe in drain
  HDPE Pipe in Landfills
  The Coating Materials Of Steel Pipes
  Cable Covering
  HDPE pipe in Ventilation
  HDPE Pipe in Ships
  HDPE Pipes in Floor Heating
  Gallery
  Polyethylene Manhole Sewage
  U-PVC Pipe
  Draining Pipe
  PEX Pipe
  Polyethylene drip irrigation tape
  PushFit System
  HDPE Dredging Pipe
  Polyethylene Welding
  Sewer Fittings
  Application of Polyethylene Manhole
  Polyethylene Tank
  PE Septic Tank
  PE Jersy Barrier
  Fire Sprinklers
  Composite Manhole Cover
  PE Valve Box
  HDPE Pipe in Sea Water
  Price of HDPE pipe
  Brochures & Catalogue
  Polyethylene Machinary
  Certificates
  Raw Material
  Borouge HDPE Pipe Systems
  Reference standards
  Standards for HDPE Pipe
  Technical Data
  Job Opportunities
  HSE Plan
  Welding Course Study
Quality Begins with Pars Ethylene Kish The new generation of parsethylene kish corrugated pipes PDMS Catalog Pars Ethylene Kish Polyethylene cage fish farming Domestic Sewage Treatment FM Approval Certificate Pars Ethylene Kish Isiri Certeficate of Parsethylene Kish 17025 Certificates Integrated Management System SGS Quality Managment System Raw Material of HDPE of Parsethylene Kish Reference standards of Polyethylene, PVC and polymer Handbook of Pars Ethylene Kish products Technical Certificate of Road, Housing and Urban Development Research Center Health Premission of Polyethylene pipefor water supply New Generation of Composite Cover Failure modes and mechanisms in cast iron pipe Case Studies Reference standards of PE, PVC and polymer Fun & Game Join us on FaceBook Follow Us on Telegram

Pars Ethylene kish does not have any representative in iran ,The Company`s products are sold only through the central office 

::
Copyright © 2007- 2018 Pars Ethylene Kish Co. :: All rights reserved :: Design & Development by: Pars Ethylene Kish ::