Polyethylene drip irrigation tape
Polyethylene Tape
Irrigation bar for drip irrigation on agricultural land, planting and greenhouse gardens are used for optimal use of water resources. Irrigation is one of the most commonly used methods in recent years. In the drip irrigation method and using Polyethylene drip irrigation tape, the total surface area of the soil is not wetted and prevents weeds from growing around agricultural products.
The amount of waste water in this method is almost zero, because mineral fertilizer and mineral water contained directly in the root reaches the root and makes the root of the growth environment moist and, given the fact that this method has not been used for a long time, but there are numerous supporters in the world, in our country, due to the fact that it is located in dry and desert regions, this method has received a great deal of welcome and farmers consider this option the most suitable way to cultivate their agricultural land in arid and desert areas.
Polyethylene drip irrigation tape of Pars Ethylene Kish is produced using German technology, and its advantages are as following:
• Affordable and compact
• Ultraviolet radiation resistant, acid and chemicals used in agriculture
• Made from the finest materials to ensure accurate and long-lasting operation
• Using the turbulent flow in the valves to reduce the possibility of clogging
• Uniform drainage for at least 200 meters with a minimum coefficient of variation
• The best choice for seasonal crops
• Can be installed in depth and soil surface
• Minimum deviation of discharge, nominal discharge (less than 5%)
• Resistant to stretching during installation
• Resistant to obstruction
• Resistant to the formation of algae and bacteria
• light weight
• Suitable package and compliant with European environmental standards
• Minimum storage space required
Polyethylene drip irrigation tape properties
|
Internal diameter-MM |
1.16 |
2.22 |
25 |
5.28 |
|
Standard distances-CM |
10-15-20-25-30-33-40-50-60-75-80-90-100 |
|
Requested distances |
Irrigation tape will be produces according to order. |
Irrigation tape dripper properties
|
Nominal debi at 1 bar(L in hr) |
8.0 |
3.1 |
6.1 |
4.2 |
8.3 |
|
Coefficient of variation |
5.2 |
1.1 |
3.1 |
2 |
2 |
|
Maximum working pressure |
2 |
2 |
2 |
2 |
2 |
|
Minimum working pressure |
5 |
5 |
5 |
25 |
5 |
|
Dripper flow route properties |
62 |
7 |
7 |
7 |
97 |
|
62 |
62 |
67 |
85 |
85 |
|
116 |
106 |
107 |
100 |
3.64 |
|
Filtration specification-mesh |
120 |
120 |
120 |
120 |
120 |
The irrigation bar is a drip tray that is simply and quickly installed and is highly efficient.
The pipe is designed to form the integral unit of the water inlets, the zigzag valley, dripper. The water is flowing through the water inlets into the zigzag pipe, which is predicted to lower the water outlet pressure. These openings act as a filter and prevent the possible entering of suspended particles in water to the zigzag duct. In practice, each dropper individually has a filter and a pressure reducing duct that operates independently and is constant at its specified discharge pressure.
