..:: Parsethylene kish co. does not have any representative in iran ,The Company`s products are sold only through the central office with an official Certificate ::..

QC Lab

Polyethylene pipe quality control

QC of HDPE Pipe

Pars Ethylene Kish is a manufacturer of all types of pipes and fittings with a quality control lab equipped with advanced laboratory equipment. By doing precise testing on its products, this company has managed to introduce high quality products on the basis of internal and external standards. This laboratory delivers its services in accordance with ISO / IEC 17025 international standard by working on the dynamics, maintenance and improvement of the effectiveness of the activities, continuous improvement and customer satisfaction.
The tests are based on DIN 16961-ISIRI 9116-EN 13476-ISIRI 18781 - INSO 14427-DIN 8074 standards.

In this company, the tests are conducted as follows:

1. Density according to ISIRI 7175-5 standard
Physical properties of polyethylene can be predicted based on its density with good approximation. For this purpose, this test is carried out in this company by flotation on raw materials and products.
2. Melt flow index ISIRI 6980 standard
This test is a method for measuring the mass melt flow rate of soft heat substances under specified temperature conditions and in grams per ten minutes.
3. Long-term cyclic resistance according to DIN 16961 standard
The long-term cyclic strength of the pipe determines the life of a pipe against external pressures imposed on it. 
4. Short-term cyclic resistance according to ISO 9969 standard
This test is a method for measuring the cyclic resistance of pipes.
5. Cyclic flexibility according to EN 1446
When the pipe is pressurized, under a particular tension, the deformation is elastic and it returns to its original shape by reducing the pipe tension. In this test, the pipe is pressurized to be curved to the extent of 30% its diameter. After removal of the force, the pipe must return to its original state and there should be no permanent movement and fracture in the pipe.
6. Measuring soot content according to ISIRI 7175-2 standard
The color of the pipe is effective on the long-term stability of the pipe against wind and sun, the soot that is added to blacken the polyethylene produces a good stability against ultraviolet radiation. This test controls the amount of soot of the raw material and the product. 
7. Soot dispersion according to ISIRI 7175-6 standard 
The precise and fine distribution of soot in polyethylene is important for achieving the desired functional properties, while the proper distribution of soot is very effective in the smoothness of the surface of pipe. This test examines the distribution and dispersion of soot.
8. Thermal return according to ISIRI 7175-3 standard
In this method, a certain length of the pipe is heated to 110 ° C. After the heating stage, the pipe surfaces are examined for defects such as gap, blister or wall separation.
9. Dimensional control according to DIN 16961-ISIRI 9116 standard
With this control, the inside diameter, the thickness of the inner wall and the height of the production profiles are examined.
10. Weld line elongation according to EN1979
This test measures the tensile strength of weld line of the spiral pipes by using tensile test machine. The spiral pipe must withstand the minimum tensile force required for the weld line.
11. Sealing 
In this test, the water pressure of 0.5 bar is applied to the pipe for one minute, and no leakage should be allowed.
QC of HDPE Pipe

The most important tests performed on these pipes are:

  • The weight percentage of soot or carbon in polyethylene
  • Density determination
  • Flexural, pressure and elasticity coefficient tests
  • Pipe tolerance threshold tests against internal pressure
  • Tests of pipes’ physical properties (Dimensions - Diameter - Color)
  • Cyclic strength of pipe
  • Oxidation of pipes (thermal stability)
  • Polyethylene Viscosity
  • Hydrostatic Testing

Polyethylene pipes should record desired results in all of these tests; the least defect in the final result of the quality control test for polyethylene pipe means poor pipe quality and defect in the production line. For example, if the soot or carbon is not distributed uniformly throughout the pipe, the different parts of the pipe will have different strengths; therefore, some sections of the pipe wall will be much more fragile than the other parts.
The thermal stability test indicates the extent to which polyethylene pipes can withstand high temperatures; this is important for pipes that are supposed to be installed in very hot working conditions.
The Polyethylene Pipe Laboratory Management (polyethylene pipe quality control unit) is committed to provide the resources and facilities needed to meet the objectives and takes appropriate measures to meet the requirements of ISO / IEC 17025 standards and continuously improve their operations, and expects the organization's CEO to provide comprehensive support for achieving this policy, realizing the goals, and implementing the precise and effective quality management system of the laboratory. All personnel are committed to familiarize themselves with the quality system of the laboratory and they are required to adhere to its principles. By trusting in the Almighty God and commitment we can take an effective step in improving the quality of the pipe industry and the polyethylene fittings of our beloved country.
QC LAB

The measuring equipment of this laboratory includes the following items:

  • Pyrolysis machine to determine the weight percentage of soot in the mixture or pipe
  • plastometer machine to determine the polymer melt flow index (MFI)
  • Oven device for determining heat recovery
  • Scale with a precision of 0.0001 g for determining the density
  • DSC device to determine thermal stability
  • Microscope to check how soot is dispersed
  • Caliper and peripheral strips to measure the dimensions of the pipe
  • Tensile Testing Machine for testing the tensile strength of the pipe
  • Electrical furnace for pyrolysis
  • Differential Scanning Calorimeter (DSC)
  • Plastometer (MFR indexer)
  • Digital balance up to 300gr
  • Electrical oven
  • Tensile
  • Microscope
  • Digital caliper
  • Circumeter (Pi-meter)
  • Ultrasound thickness
  • Measuring device
  • Digital balance up to 30kg
  • Air thermometer and hygnometer (digital)
  • Meter
  • Chronometer
  • Generator and controller of internal hydrostatic pressure

Laboratory accessories:

This equipment are needed to test and evaluate the quality of HDPE pipes and can be used to evaluate the quality of raw materials and polyethylene pipes.

Quality Control Laboratory

17025 Certificates

Single wall polyethylene pipe laboratory

Corrugated Pipe Laboratory

Polyethylene pipe quality control

Polyethylene pipe inspection checklists

The Reason for High Quality of Pars Ethylene Kish Products

Reasons of paying attention to quality

Guaranty and after sales service

QC Lab

QC Lab

QC Lab

ISO 17025



Top categories

UAE 1: 00971 56 286 1414
H.Emami @ Parsethylene-kish.com
UAE 2: 00971 56 286 1515
Info @ Parsethylene-kish.com
IR : +9821 88 20 20 60
  Contact us
  Pars Ethylene Kish at a glance
  Pars Ethylene Kish, a symbol of capability and quality
  Mission and Vision
  Sale and its Strategies in Pars Ethylene Kish
  Reason for High Quality of Pars Ethylene Kish Products
  Quality Control Laboratory
  Guaranty & after sales service
  Reasons of paying attention to quality
  INSO Certificate
  Maintenance and storage of HDPE pipes
  Instructions for storing HDPE pipe against UV
  Polyethylene Joining Procedures
  Polyethylene Pipe
  HDPE pipes for gas supply
  HDPE Corrugated Pipes
  HDPE Single Wall Fittings
  HDPE Double Wall Fittings
  HDPE Electrofusion Fittings
  Cage fish farming
  Domestic Sewage Treatment
  Polyethylene Manholes
  Telecommunication manhole
  HDPE Fire Fighting Pipe
  HandBook of HDPE Pipe
  HDPE Pipe price list
  Price list of double-Layer Corrugated pipe
  FM Approval
  PDMS Catalogue
  HDPE Pipes in Power Plants
  HDPE Pipes in railway and urban rail
  HDPE Pipe in Mining
  HDPE Pipe in Airport
  HDPE Pipe in Conducting Agricultural Pesticides
  HDPE Pipe in drain
  HDPE Pipe in Landfills
  The Coating Materials Of Steel Pipes
  Cable Covering
  HDPE pipe in Ventilation
  HDPE Pipe in Ships
  HDPE Pipes in Floor Heating
  Gallery
  Polyethylene Manhole Sewage
  U-PVC Pipe
  Draining Pipe
  PEX Pipe
  Polyethylene drip irrigation tape
  PushFit System
  HDPE Dredging Pipe
  Polyethylene Welding
  Sewer Fittings
  Application of Polyethylene Manhole
  Polyethylene Tank
  PE Septic Tank
  PE Jersy Barrier
  Fire Sprinklers
  Composite Manhole Cover
  PE Valve Box
  HDPE Pipe in Sea Water
  Price of HDPE pipe
  Brochures & Catalogue
  Polyethylene Machinary
  Certificates
  Raw Material
  Borouge HDPE Pipe Systems
  Reference standards
  Standards for HDPE Pipe
  Technical Data
  Job Opportunities
  HSE Plan
  Welding Course Study
Quality Begins with Pars Ethylene Kish The new generation of parsethylene kish corrugated pipes PDMS Catalog Pars Ethylene Kish Polyethylene cage fish farming Domestic Sewage Treatment FM Approval Certificate Pars Ethylene Kish Isiri Certeficate of Parsethylene Kish 17025 Certificates Integrated Management System SGS Quality Managment System Raw Material of HDPE of Parsethylene Kish Reference standards of Polyethylene, PVC and polymer Handbook of Pars Ethylene Kish products Technical Certificate of Road, Housing and Urban Development Research Center Health Premission of Polyethylene pipefor water supply New Generation of Composite Cover Failure modes and mechanisms in cast iron pipe Case Studies Reference standards of PE, PVC and polymer Fun & Game Join us on FaceBook Follow Us on Telegram

Pars Ethylene kish does not have any representative in iran ,The Company`s products are sold only through the central office 

::
Copyright © 2007- 2018 Pars Ethylene Kish Co. :: All rights reserved :: Design & Development by: Pars Ethylene Kish ::